Caltech Library TechLab currently has 17 total FFF/FDM 3D printers in operation:

  • 9x CraftUnique CraftBot Plus
  • 4x Creality CR-10
  • 3x MAKEiT Pro-M
  • 1x MAKEiT Pro-L

We use exclusively 1.75mm PLA filament, unless by special request.


CraftUnique Craftbot Plus - http://craftbotusa.com

craftbotplus.png

  • Build Volume: 250 x 200 x 200 mm / 9.8 x 7.9 x 7.9 in
  • Platform: Removable aluminum plate w/ PEI surface on heated platform, up to 110 °C
  • Extruder: 1, up to 260 °C
  • Nozzle Size: 0.4 mm
  • Finest Layer Resolution: ≥ 100 micron (0.1 mm)
  • Filament Diameter: 1.75mm
  • Compatible Materials: ABS, PLA, T-Glase/PETG, Nylon, NinjaFlex, Laywood, specialty "-fill" type PLA (bronze, copper, etc) and more

For More Info: https://craftbotusa.com/craftbot


Creality CR-10 - http://www.creality3d.cn/

  • Build Volume: 300 x 300 x 400 mm / 11.8 x 11.8 x 15.7 in
  • Platform: Removable glass plate on heated platform, up to 75 °C
  • Extruder: 1, up to 250 °C
  • Nozzle Size: 0.4 mm
  • Finest Layer Resolution: ≥ 100 micron (0.1 mm)
  • Filament Diameter: 1.75mm
  • Compatible Materials: ABS, PLA, T-Glase/PETG, Nylon, NinjaFlex, Laywood, specialty "-fill" type PLA (bronze, copper, etc) and more

For More Info:  [link coming soon]

Purchase of the CR-10's was made possible by an approved Caltech Association of Makers grant proposal submitted to the Moore-Hufstedler Fund for the Enhancement of Student Life at Caltech in the Spring of 2018.  Thank you CAM and MHF!


MAKEiT Pro-M & Pro-L  - http://www.makeit-3d.com

MAKEiT Pro-M

  • Pro-M | Build Volume: 200 x 240 x 200 mm / 7.9 x 9.5 x 7.9 in
  • Pro-L | Build Volume: 305 x 254 x 330mm / 12 x 10 x 13 in
  • Platform: Removable magnetic stainless steel plate w/ PEI surface on heated platform, up to 120° C
  • Extruder: 2, up to 275° C
  • Nozzle Size: 0.4mm
  • Finest Layer Resolution: ≥ 10 micron (0.01 mm)
  • Filament Diameter: 1.75mm
  • Compatible Materials: ABS, PLA, T-Glase/PETG, Nylon, NinjaFlex, Laywood, specialty "-fill" type PLA (bronze, copper, etc) and more

For More Info: http://www.makeit-3d.com/pro-m/